GL-1500P 1500W 12V DC-110V AC 60Hz Pure Sine Wave Inverter

In stock
This is a solid made pure sine wave inverter with 110V AC output for US. It has two US output sockets for convenience. The total output wattage for continuous running is 1500W, which is good for laptops, pads, cell phones, TVs, cookers, LED lights...


  • Intelligent thermistor based temperature control for quiet long term running
  • Digital display for both DC input voltage and AC output voltage
  • Built-in fuse for protecting the unit from reverse polarity connection; 2 additional fuses provided for quick solution
  • True Pure Sine Wave, EMC teseted, no electromagnetic interference
  • Two US output sockets


DC Voltage 12V
Voltage Range 10-15V DC
NO Load Current Draw < 2.1A
Efficiency > 90%
DC Connector Cables With Clips or Car Adaptor
AC Voltage 110V AC 
Continuous Power 1500W
Surge Power 3000W
Waveform Pure Sine Wave
Frequency 60HZ
AC Regulation 3%
Low Voltage Alarm 10VDC±0.5V
Low Voltage Shut Down 9.5VDC±0.5V
Over Load Shut Off Output
Over Voltage Shut Down 15.5V
Over Thermal Shut Off Output Automatically
Fuses Short Circuit
Working Temperature Between -10 °C and +50 °C
Working Humidity 20%~90%RH non-condensing
Storage Temperature Between -30 C°C and +70 °C
Start Soft Start
Cooling Ways Cooling Fan
Total Harmonic Distortion (THD) < 5%
Machine Size 265x210x95mm (10.4x3.7x8.3inch)
Packing Size 380x315x160mm (15.0x12.4x6.3inch)
Net Weight  3.7 kg (8 lbs)
Gross Weight  4.4 kg (9.7 lbs)
Packing Type Carton Packing

Click here for the inverter guide.

Tips: How to choose a right inverter

There are two kinds of loads: resistive load and inductive load.

The loads like laptop, TV, electric cooker, LED light... are resistive loads. As long as the rated wattage of the load is less than the wattage the inverter can handle, it's fine. Just Choose the inverter with continuous power higher than the appliance's rated power. The loads like printer, drill, saw, mixer, pump, compressor, motor...are inductive loads. Usually inductive loads will need 3-9 times current than the rated when it initiates. For example, for a Brother HL2040 laser printer, the rated wattage is 450W. The inverters surge rating should be able to handle 6.5 times the maximum power of the printer, which is around 3000W.


More Information
SKU GL-1500P
Input Voltage 12V DC
Output Voltage 110V AC 60Hz
Write Your Own Review
You're reviewing:GL-1500P 1500W 12V DC-110V AC 60Hz Pure Sine Wave Inverter
Copyright © 2019 Golander LLC, All rights reserved.