GL-3000P 3000W 24V DC to 110V AC 60Hz Pure Sine Wave Inverter

Out of stock
Only 0 left
This is a solid made pure sine wave inverter with 110V AC output for US. Please note the input voltage is 24V DC. It has two US output sockets and a terminal block for hard wiring for convenience. The total output wattage for continuous running is 3000W.


  • Intelligent thermistor based temperature control for quiet long term running
  • Digital display for both DC input voltage and AC output voltage
  • Built-in fuse for protecting the unit from reverse polarity connection; 2 additional fuses provided for quick solution
  • True Pure Sine Wave, EMC teseted, no electromagnetic interference
  • Two US output sockets


DC Voltage 24V
Voltage Range 21-30V DC
NO Load Current Draw < 2.1A
Efficiency > 90%
DC Connector Cables With Clips or Car Adaptor
AC Voltage 110V AC 
Continuous Power 3000W
Surge Power 6000W
Waveform Pure Sine Wave
Frequency 60HZ
AC Regulation 3%
Low Voltage Alarm 20.5VDC±1V
Low Voltage Shut Down 19.5VDC±1V
Over Load Shut Off Output
Over Voltage Shut Down 30.5V
Over Thermal Shut Off Output Automatically
Fuses Short Circuit
Working Temperature Between -10 °C and +50 °C
Working Humidity 20%~90%RH non-condensing
Storage Temperature Between -30 C°C and +70 °C
Start Soft Start
Cooling Ways Cooling Fan
Total Harmonic Distortion (THD) < 5%
Machine Size 450x230x110mm (17.7x9.1x4.3inch)
Packing Size 510x330x190mm (20.1x13.0x7.5inch)
Net Weight  5.5 kg (12 lbs)
Gross Weight  6.8 kg (15 lbs)
Packing Type Carton Packing

Click here for the inverter guide.

Tips: How to choose a right inverter

There are two kinds of loads: resistive load and inductive load.

The loads like laptop, TV, electric cooker, LED light... are resistive loads. As long as the rated wattage of the load is less than the wattage the inverter can handle, it's fine. Just Choose the inverter with continuous power higher than the appliance's rated power. The loads like printer, drill, saw, mixer, pump, compressor, motor...are inductive loads. Usually inductive loads will need 3-9 times current than the rated when it initiates. For example, for a Brother HL2040 laser printer, the rated wattage is 450W. The inverters surge rating should be able to handle 6.5 times the maximum power of the printer, which is around 3000W.

More Information
SKU GL-3000P-24
Input Voltage 24V DC
Output Voltage 110V AC 60Hz
Write Your Own Review
You're reviewing:GL-3000P 3000W 24V DC to 110V AC 60Hz Pure Sine Wave Inverter
Copyright © 2019 Golander LLC, All rights reserved.